1.Casting: HT300 resin iyanrin yiya-sooro simẹnti ni ga iwuwo ati ki o dara yiya resistance!gàárì, gba a ni ilopo-Layer simẹnti be, ati awọn ti o tobi A-sókè iwe ẹya fihan ga rigidity gige agbara.
2. Spindle: gba Taiwan ga-iyara spindle 8000rpm, rọrun ati iwapọ be, ṣiṣe to ga, kekere ariwo, kekere gbigbọn ati ki o ga konge.
3.Screw: Itọnisọna itọnisọna gba ipele fifun JIS-C3 ti a ti wọle ti a ti n wọle lati ṣaju nut nut lati ṣe imukuro ẹhin, lẹhin itọju ooru, o ni rigidity ti o dara, wọ resistance, ati awọn iṣeduro iṣeduro giga ti iṣẹ naa.
4. Iyipada ọpa aifọwọyi: Iru ijanilaya Taiwan (16 knives) iwe irohin ọpa.Awọn anfani: yiya kekere, igbesi aye gigun, atunṣe irọrun, ati oṣuwọn ikuna kekere.
5.Testing: Gbogbo awọn ẹrọ ile-iṣẹ ti lọ nipasẹ awọn igbesẹ ayẹwo ti kikọlu laser, ẹrọ daakọ, wiwọn gangan, bbl Ṣe idaniloju didara iṣelọpọ ti ọja kọọkan.
| CNC milling Machine | VMC650 |
| Irin-ajo X (mm) | 650 |
| Y irin ajo (mm) | 450 |
| Irin-ajo Z (mm) | 500 |
| Ìwọ̀n tábìlì (L×W) (mm) | 900×400 |
| Eru ti o pọju (kg) | 400 |
| Aarin Spindle si ọwọn (mm) | 575 |
| Yi imu si tabili (mm) | 100-600 |
| Rogodo dabaru | 4012 |
| X, Y, Z iyara gige (mm/min) | 1-6000 |
| X, Y, Z iyara iyara (m/min) | 15 |
| Iyara Spindle (r/min) | 50-8000 |
| Spindle taper | BT40 |
| Moto Spindle (kw) | 5.5 |
| T Iho (mm) opoiye×iwọn × ijinna | 5/18/75 |
| Yiye (300mm) | 0.005 |
| Ipeye atunwi (300mm) | 0.003 |
| Titẹ afẹfẹ (Mpa) | 0.6 |
| Ìtóbi (L×W×H)(m) | 2.65 * 2.15 * 2.55 |
| iwuwo (T) | 4.0 |
Akoko ifiweranṣẹ: Oṣu kejila-20-2021